Tried hard to fix Netgear extender orange light issue but nothing worked? Fret not! Walk through this how-to article and find quick fixes to troubleshoot Netgear extender orange light issue in minutes. Let’s take the plunge!
Fix: Netgear Extender Orange Light Issue
Uninterrupted Power Supply
This is one of the main reasons behind Netgear extender orange LED issue. To fix it, make sure to provide your Netgear extender a steady power supply.
Your Device Is Overheated
Similar to humans, your Netgear extender needs a break too. So, shut down your Netgear extender for 10-15 minutes and then turn it on. Apply this process at;east once in a month to avoid overheating of your device.
Obsolete Firmware Version
In case you are avoiding the firmware update notifications for a longer time, then you might find yourself stuck with Netgear extender orange LED issue. So, have access to mywifiext web page, search for the updates and if the new firmware version is available for your device’s model, update it by following the on-screen instructions.
Partial Extender Installation
Partial or improper Netgear extender setup may lead you to the issue. In such a case, resetting and setting up Netgear extender again can save you from plethora of issues.
Have you connected your router to the Netgear extender using an Ethernet cable? If yes, then check the Ethernet connection you have made between them. The cable connection should be precise and finger-tight between your devices.
Netgear Extender Not Connected To The Internet
WiFi extender not connecting to internet? If so, then this can also be the reason behind Netgear extender orange LED issue. To prevent this, make sure to connect your Netgear extender to the router’s SSID securely. Also, ensure that you have enabled router’s SSID.
Wrong Location Of Your Netgear Extender
If you have located your Netgear extender in a corner or away from your main router then also you may stuck into the issue. So, to make your extender up and running with stable LEDs make sure to place your Netgear extender on a higher and center location of your house, near to your router’s WiFi network.
Still facing the same issue?
If the same issue is spinning your head even after following the aforementioned troubleshooting steps, then the only way out to fix Netgear extender orange LED issue is to reset it back to factory default values. Though the reset process major issues with your Netgear extender but it also erases the settings stored in it. So, to avoid any inconvenience, make sure to take the backup of the customize extender’s settings prior to resetting it back to factory default values.
Let’s take the plunge to reset Netgear extender to factory default settings.
How to Reset Netgear Extender?
To reset Netgear extender in a hassle-free manner, follow the steps given below:
-
Power up your Netgear extender. Make sure to provide your Netgear extender an adequate power supply during the entire reset process.
-
Disconnect your Netgear extender from your router’s WiFi network.
-
Now, grab a pin or paper clip and push the Netgear extender reset hole with it.
-
Fab! Your Netgear extender resets successfully.
Using the default factory settings, go for Netgear extender setup process again.
This is how you can fix Netgear extender orange LED issue in minutes. On the off chance if the orange LED issue on your Netgear extender is still troubling you, don’t hesitate to contact our veteran experts via comments. And if any one of the troubleshooting fix helped you out in fixing the issue, do share with us which method was that.